Job Summary

Oversee environmental compliance, chemical safety and risks in painting, grinding and polishing operations. Work with Production, FAC and Engineering to control dust, VOCs, solvents and waste, ensuring compliance with the Environmental Permit, Vietnamese regulations and Jabil requirements.

Key Responsibilities

Chemical & Process Safety

·       Review new chemicals: SDS, hazard classification and disclosed ingredients/CAS data.

·       Maintain the chemical inventory, SDS, labels and chemical safety records.

·       Monitor chemical segregation, compatibility, storage, ventilation and spill prevention.

·       Assess painting, solvent mixing, grinding and polishing risks; control dust and VOCs.

·       Check PPE, grounding/static control, interlocks and other safety measures.

·       Work with FAC/Engineering on dust and solvent-vapor fire and explosion risks.

·       Guide spill response; participate in MOC, PSSR and chemical incident investigations.

Environmental Management

·       Track Environmental Permit conditions and legal obligations.

·       Monitor waste segregation, storage and transfer.

·       Review waste manifests, contractors and appropriate treatment methods.

·       Coordinate with FAC/Engineering on dust/VOC collection and wastewater systems.

·       Coordinate air, wastewater and related occupational exposure monitoring.

·       Compile water, emission, waste and environmental performance data.

·       Promote emission reduction and waste recycling.

·       Prepare statutory environmental reports and inspection/audit records.

Compliance & Audit

·       Monitor environmental, chemical and process safety legal obligations.

·       Support ISO 14001, ISO 45001, RBA and customer audits.

·       Track findings, corrective actions (CAPA) and their effectiveness.

·       Maintain SOPs, work instructions, checklists and JTV 77-series EHS records.

Reporting

·       Chemical inspections, SDS status and process risk reports.

·       Environmental and Permit compliance reports.

·       Waste, monitoring and environmental KPI reports.

·       Chemical incidents, environmental deviations and CAPA reports.

·       Reports requested by the EHS Supervisor, customers and authorities.

Qualifications

Education

·       MANDATORY: Bachelor’s degree in Chemistry, Chemical Engineering, Chemical Technology or a directly chemical-related discipline.

·       Training in chemical safety, chemical processes, VOCs, coating technology or pollution control is preferred.

·       Equivalent majors require transcript verification; short courses do not replace the relevant bachelor’s degree.

Experience

·       Minimum 2 years of EHS, environmental or chemical safety experience in manufacturing.

·       Experience managing chemicals, SDS, waste and compliance records.

·       Knowledge of dust/VOCs, paint shops, chemical storage and exposure controls.

·       Experience in electronics, coating, grinding/polishing or molding is preferred.

·       ISO 14001, ISO 45001 or environmental inspection experience is an advantage.

Skills

·       Chemical hazard identification and process risk assessment.

·       Ability to interpret SDS and chemical/emission controls.

·       Effective coordination with Production, FAC, Engineering and contractors.

·       Data analysis, reporting and CAPA follow-up skills.

·       Onsite guidance and audit/inspection support capabilities.

·       Working communication skills in English or Chinese.